Extra Automatic Remote Switch Water Level Sensor Liquid Level Controller Float Switch for Submersible Pumps (control on-off operation) Sensor De Nivel De Agua

• Type: Float Switch
• Contact: Contact
• Output Signal Type: Switching Type
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: X1000
• Production Process: Diaphragm
• Feature: Automatic Operation
• Material: Plastic
• IP Rating: IP68
• Certification: CE
• Customized: Non-Customized
• Max Temperature: 50ºC
• Max. AMPS Running: 10A
• Transport Package: Brown Box Packing
• Specification: 148x86x42mm
• Trademark: Mepcato
• Origin: China
• HS Code: 8536500090
• Production Capacity: 30000PCS/Month

Product Description

Description

Includes: (1) Pump Cut-Off Switch, (2) Mountain Screws, (2) Cable Ties, (1) M-100 bracket


 

Features

 

• Converts any manual pump to automatic operation, up through 1 HP
• Easy Installation, with Quick Piggy-Back Plugs and Power Socket
• When the water drops too low, the switch turns the pump off; when the water level comes back up the switch turns the pump back on
• Match with Little Giant 5-MSP,start level 5cm-7.6cm,off level 1.27cm-3.8cm

 

Installation

• For installation on the Little Giant 5-MSP, 6-CIM-R or 6-CBM-R pumps
• For installation on M-100, HOME, CSS-250, 50PS pumps
• For universal installation, X-1000 can be attached to a pipe with the cable ties provided
• Automatic power cord contains a breather tube. Be sure power cord is not pinched so that breather tube is obstructed. Non-restrictive air flow in breather tube is required for proper operation
• Test the pump after all electrical connections have been made. Do not attempt to run the pump without water; this could result in permanent damage to the pump

 

 

Packaging & Shipping

Certifications

 

Company Profile

 

Our Advantages

1. Highly efficient motor design for 24 hours continuous duty use.
2. Adopt Italian imported mechanical seal for double waterproof protection.
3. Design with Oil Chamber, provides for the most durable seal design, lubrication and cooling.
4. Motor with Thermal Protector to prevent motor failure due to pump problem or accidental run-dry conditions.
5. Internal wires connect by terminal design, solid and reliable.
6. Power cable rubber seal designed by filling epoxy to raise humidity-resistance.
7. Each pump with laser printed serial number to record the production date.
8. All pumps are 100% tested in pump head line and completed pump production line.
9. The special test all the pumps will perform is the low voltage start-up test.

FAQ